Category: Ball Valves

Ball valves- Uses in food & beverage industry

Ball Valve is the valve that can either be turned on or off by opening the valve and closing the valve, respectively. This type of valve uses a hollow, perforated, and pivoting ball to control flow through it. If the handle of the ball valves lies flat in alignment with the flow, then the valve is in an open state. When the handle of the valve is perpendicular, then the ball valve is closed. Hence the confirmation of the ball valve status can be checked easily by looking at the alignment of the ball valve handle. 

Whenever we are going to any online grocery stores and purchase food items likes cereals, cookies, canned fruits, and pastries, you might have wondered how this food must have been processed. This is where ball valves play a crucial role in the food and beverage industries.  Ball valves are flow valves that are quarter turn is used to shut off and control purposes. The ball valves are very easy to operate and can control and maintain high volume, high flow of temperature, and high pressure.

 Ball valves are more efficient than traditional butterfly valves that are explicitly used for the circulation of stream water only. Ball valves that are used in food processing industries can be subclassified into two categories. They can be a valve that comes in direct contact with the food and the second that are used in utility services involved in the food industry.

Both of these types of Ball valve are regulated, but the one which is in direct contact of food must undergo stringent checks. Even a small contaminant in the valve will lead to compromise with product quality and increase the cost of production.

 

Types of Ball valves that are used in Food and beverage industries

  • One-piece Ball Valves:- These types of ball valves are less in cost and are basically “throw-away” type valve. There are no leakage points in this category of ball valves.
  • Two-piece ball valves:- These types of ball valves are most common. It has one body joint that has fewer chances of leaks. They can take part in maintenance as well.
  • Three-piece ball valves:-These types of ball valves can be disassembled easily for maintenance. The internal parts can easily be swapped.

 

We as SKG Pneumatics, distributor and ball valve supplier supply a wide range of ball valves from best makers of the industry like beta flow, NVR, Zoloto Valve etc. Our entire range of ball valves is the best valves that are designed keeping the design specification and its requirements in mind. These valves are reliable and highly durable. They can be used in food manufacturing industries, food processing companies, or the beverage industry.

 

Ball Valves – Types and Applications

Ball Valves are used to control the flow of the water or any other liquid. The industry has various demands according to the pressure that is having. For case, some of the industries that are dealing with high pressure of water will need the standard quality materials whereas there will be some industries where the amount of the flow will matter.

SKG Pneumatics Inc has been dealing all the type of valves such as Gate valves, Globe Valves, Ball Valve with strainers, Check Valves & Non-return Valve, Gate & sluice valve, Pressure Reducing Valve, Shutoff valves.

There are different types of Ball Valves available in our store. All of these valves used in Plumbing are built with the standard raw material to maintain durability.

Get quality of Ball Valves from leading ball valve supplier

There are many types of valves that are used in the industries. We provide all the valves that you need for all the industries. All the valves are built with great raw materials and the quality to ensure the durability of the product. Along with all of these, we also know about the budget of our customers and hence all the valves are affordable to buy for any of the customers. Here we as ball valve supplier offer different types of valves-

• Split-Body Ball Valve: Here the body is divided into two different parts and the cover along with the ball, seat rings are present.
• Top-Entry Ball Valve: They are available in various size and used by the people who are looking for having a single-piece body with the top entry.
• End-Entry Ball Valve: In this product, the ball is inserted at one end and is retained from other. These are the most affordable valves and are also available in large size.
• Three-Piece — Body Ball Valve: Her body is divided into the 3 parts where one main part is for holding the internals and the stem is released from the top where a hole is given.
• Double Trunnion Ball Valves: The ball is added with the two other integral shaft extensions. These are called the bottom and top trunnions. These are made to hold and for the shaft to rotate freely. A top shaft is used to open and close.

Also, if any of the valves have any variation, we also provide them. All of these are easy to install and will last for a long duration of time. You can use any of these for each and every need.

Types of Pipe valve

A valve is a device that can control the flow and pressure of the fluid in a pipe. A few either starts or altogether stops the flow of fluid whereas there are some that partially obscures the path.

The different types of pipe valves are explained below in detail.

Ball Valves

Ball valves operate with a quarter-rotary motion. In a ball valve, the flow path is manipulated by the ball-shaped disk which requires a 90-degree turn of the valve handle. It is comparatively smaller in size and lighter than a gate valve.

Butterfly Valves

Butterfly valve can start, stop, and regulate the flow path but only to some extent. It is a simple valve that can be operated by a 90-degree turn of the valve handle. A butterfly valve is not normally designed to give a positive shut-off but modern technology has provided room for improvement in its blueprint. This valve is now capable of a bubble-tight shut-off.

Check Valves

Check valves, or NRVs (non-return valves), supports the unidirectional flow of fluid only. Their function is to check backflow. In check valves, backflow is prevented by “stoppers”. The different kinds of “stoppers” are ball, piston, and swing. Ball and piston check valves work by demanding a little amount of inbound flow pressure. The movement of fluid in a swing check valve is through a pivoting flap which opens only in one direction and ensures that there is no backflow.  

Gate Valves

Gate valves are the most ordinary and the most frequently sold valve type in the industrial valve trade. These act as a block valve for isolating pipe systems since their properties are limited to either opening or closing. There is no restriction in the flow path once a gate valve is opened as it opens all the way. Gate valves are preferred in a straight-line system that requires minimum obstruction. You can regulate a gate valve with the help of a hand-wheel or a piston actuator.

Pressure Reducing Valves

If you are looking for a device to reduce the water pressure, pressure reducing valve is your answer. These valves get down to work by bringing down the quantity of water that flows through a pipe. With the valve, water that was pushing through the pipes at high pressure will be efficiently slowed down.

 

You must surely recognize the valve that you’ve been looking for all this time. Get one from leading suppliers of industrial valves in Delhi as SKG Pneumatics Inc at the earliest, for best prices!

One Stop Solution For All Your Industrial Needs

There are certain products for which you can’t help but trust the best. In that case, there is one name that you can trust for all your industrial needs. It is none other than SKG Pneumatics. In this world of multi-brands and products, getting bluffed for poor quality fake products might go on and be detrimental for one’s business or other industrial needs. That is why we at SKG Pneumatics strongly believe that there are two chief reasons that are to be maintained: 

  • Genuine products
  • Customer satisfaction

We are suppliers one of the best manufacturing equipment that has valve mechanisms like Gate & sluice valve, Hydrant Valve & Landing valve. We ensure the best quality in these products since we do proper market survey before stocking and delivering our products, to understand the current market needs.

The top reasons for choosing our products from SKG Pneumatics are: Fire Fighting Equipment Distributors

  • Best material quality
  • In-time delivery
  • Precision in manufacturing
  • Well maintained standards
  • Takes up an order in bulk and other amounts as desired
  • Best post-purchase service

Our Industrial Valves & Fire Equipments of their usage are the follows:

  • Y & Pot strainers
  • Check valves & Non-return valve
  • Hose Pipe, Rubber Bellows
  • Fire equipment– The Fire fighting equipments are the equipment designed to extinguish or put off fires or protect the user from the fire. this equipment is usually used by trained firefighters, as well as untrained users at the scene of a fire breakage or similar unfateful situations. These are often built into a building’s infrastructure (such as a sprinkler system).
  • Strainers– The strainer plays a pivotal role in maintaining fluid circulation through the pump constantly. It prevents blocking of nozzles and provides optimal operation of the sprayer.
  • Gate & sluice valve – Sluice valve is a kind of valve which is opened by lifting a round or rectangular gate or a wedge which is out of the path of the fluid. It is because of their ability to cut through liquids, the gate valves are often used in the petroleum industry.
  • Hydrant Valve and Landing valve –  Hydrant Valves are the valves which are fitted on the post of hydrant stands. The Landing Valves are used for firefighting operations. It is offered on the riser in buildings. The Landing valves are mainly placed typically in the staircase landing for firefighters to have access easily. Landing valves is undoubtedly an important part of a hose system for firefighting. Hydrant Valve & Landing Valve both are the same type of important valve used for firefighting.

At SKG Pneumatics, as Fire Fighting Equipment Distributors for industrial products are the ones made up of manufacturing materials and plants, machinery and any other component or goods used by other firms or industries. Our industrial designer’s brand partners can make innovative designs which are functional and affordable for one and all. We use quality industrial products, for which they can explore the design concepts.

So, do not think even twice before choosing us since we offer the best products at the best price.