Tag: Landing valve

What is the difference between Hydrant Valve & Landing valve?

Landing valves are something that is used for fighting fires and is provided on risers in buildings. These are usually located in staircase landings, allowing easy access to firefighters. A fire hydrant system is comprised of water supply pipework and valves, which can be connected to the hose of fire brigades for firefighting purposes. Hose reel drum and hose pipe are also effective in fighting fires inside a building. Both the hydrant valve and landing valve have similar designs, irrespective of the place installed. Flow Control Valve is a device that is used to control the flow of water by varying the size of the flow directed by a signal from a controller. 

Difference between Hydrant Valves & Landing Valves:

Landing Valve

Landing valves are permanently charged with water using a pressurized supply. In simple words, they are globe valves, installed on hydrants. Also, a hose and a branch are connected to a coupling on it. Landing valves are installed in all the floors of a building where installation of hydrant valve is not possible and is then used by fire fighting department to extinguish the fire. The normal pressure of a landing valve is around 65 psi. In order to keep the nominal working pressure at the inlet of the hose reel, a pressure reducing valve is used in hose reel system.  

Hydrant Valves

Fire Hydrant Valves are efficient in fighting large fires. They allow firefighters to extinguish the fire from a distance. Pumping facility is the most important part of the fire hydrant system. The main use of the pump is to pull the water from the reservoir and supply the same pressure to the hydrant points enabling firefighters to extinguish the fire effectively. In order to connect and operate fire fighting equipment from a hydrant valve, the pressure rating must be 100 psi (7 kg/cm2). But, it varies depending on the size of the building. The pressure of hydrant valves in large industrial complexes might range around 10-11 kg/cm2 while in small buildings it might range around 4-5 kg/cm2.  

Fire sprinklers and flexible hoses can be effective in fighting small fires. Fire sprinklers discharge water when the effect of fire or extensive heat is detected and is effective in the early stage of fire. Flexible hoses act as a connection between the pump to the system. The standard length of a flexible hose is around 100 ft.  

If you’re looking for fire fighting instruments, SKG PNEUMATICS INC might be the best choice, with more than 14 years of experience they deliver quality instruments of highest standards.

One Stop Solution For All Your Industrial Needs

There are certain products for which you can’t help but trust the best. In that case, there is one name that you can trust for all your industrial needs. It is none other than SKG Pneumatics. In this world of multi-brands and products, getting bluffed for poor quality fake products might go on and be detrimental for one’s business or other industrial needs. That is why we at SKG Pneumatics strongly believe that there are two chief reasons that are to be maintained: 

  • Genuine products
  • Customer satisfaction

We are suppliers one of the best manufacturing equipment that has valve mechanisms like Gate & sluice valve, Hydrant Valve & Landing valve. We ensure the best quality in these products since we do proper market survey before stocking and delivering our products, to understand the current market needs.

The top reasons for choosing our products from SKG Pneumatics are: Fire Fighting Equipment Distributors

  • Best material quality
  • In-time delivery
  • Precision in manufacturing
  • Well maintained standards
  • Takes up an order in bulk and other amounts as desired
  • Best post-purchase service

Our Industrial Valves & Fire Equipments of their usage are the follows:

  • Y & Pot strainers
  • Check valves & Non-return valve
  • Hose Pipe, Rubber Bellows
  • Fire equipment– The Fire fighting equipments are the equipment designed to extinguish or put off fires or protect the user from the fire. this equipment is usually used by trained firefighters, as well as untrained users at the scene of a fire breakage or similar unfateful situations. These are often built into a building’s infrastructure (such as a sprinkler system).
  • Strainers– The strainer plays a pivotal role in maintaining fluid circulation through the pump constantly. It prevents blocking of nozzles and provides optimal operation of the sprayer.
  • Gate & sluice valve – Sluice valve is a kind of valve which is opened by lifting a round or rectangular gate or a wedge which is out of the path of the fluid. It is because of their ability to cut through liquids, the gate valves are often used in the petroleum industry.
  • Hydrant Valve and Landing valve –  Hydrant Valves are the valves which are fitted on the post of hydrant stands. The Landing Valves are used for firefighting operations. It is offered on the riser in buildings. The Landing valves are mainly placed typically in the staircase landing for firefighters to have access easily. Landing valves is undoubtedly an important part of a hose system for firefighting. Hydrant Valve & Landing Valve both are the same type of important valve used for firefighting.

At SKG Pneumatics, as Fire Fighting Equipment Distributors for industrial products are the ones made up of manufacturing materials and plants, machinery and any other component or goods used by other firms or industries. Our industrial designer’s brand partners can make innovative designs which are functional and affordable for one and all. We use quality industrial products, for which they can explore the design concepts.

So, do not think even twice before choosing us since we offer the best products at the best price.